I am working with the TIDEP-01032 example from the AM243x Motor Control SDK 09.02.00 and don't understand how the EtherCAT Firmware is loaded onto the PRU-ICSSG. In the EtherCAT Slave Simple Demo, ...

I am using the EMIF interface to access both an external SRAM and an FPGA. Do you recommend adding series resistors (10-22 ohms each) to the EMIF signal lines, since the interface will be running at ...

Can the IN+ and IN- of the INA180-Q1 current sensing operational amplifier meet the 5B pulse requirements? (Note: The front-end circuit will have a TVS tube, clamp voltage: 38.9V) ...

I encountered a problem when debugging the HRPWM. The EPWMCLK is 100MHz，I think the MEP_ScaleFactor should be 65 or 66 cause the MEP step size is 150ps. But when I use the SFO function, the ...

We are working on a custom board with F2800157 MCU. Same MCU Launchpad with DRV8353 we can run the motor smoothly at various speeds. But when we moved the code verified code to the custom board, the ...

TPS61165DRVRG4 is constant current LED driver. The LCD module backlight has a spec for both voltage and current. for example, our backlight has a current spec 180mA and voltage spec typ 9.6V, max10.2V ...

I am working towards answering your question, but the lab work required will take me a bit of time. I will have an answer for you by the end of the week. There is no ripple specification that has been ...

May I know the difference between LP2985-50DBVTM3 and LP2985A-50DBVRM3? Both are M3 new chip device, but what's the difference between A and Non-A of M3 devices?

I am trying to use TPS61165 IC. I am using this IC for LCD Back light control, Which has 27 LED (3S ,9P). Required LCD backlight forward voltage: 9.6V (Typ) Required LCD backlight forward Current: ...

Does PPB load ADCPPBxPSUM into ADCPPBxSUM only when ADCPPBxPCOUNT is equal to ADCPPBxLIMIT? JC: In addition to COUNT=LIMIT, PSUM will also be loaded to SUM if external HW sync as described in the ADC ...

I am building a custom board for TMS570LS0432 IC . I require your help regarding the following issue: How is the power dissipation of the TMS570LS0432 IC calculated? I require it for thermal design of ...

I am configuring a new laptop with TI development tools, using the same products as on an older computer. The older computer has been running CCS version 12.4 and C2000ware version 5.02.00.00 for over ...